张蕾,李瑞卿,信世民, 等. 一种适用于无人值守台站电源控制器的研究与实现[J]. 华北地震科学,2020, 38(1):54-56. doi:10.3969/j.issn.1003−1375.2020.01.008.
引用本文: 张蕾,李瑞卿,信世民, 等. 一种适用于无人值守台站电源控制器的研究与实现[J]. 华北地震科学,2020, 38(1):54-56. doi:10.3969/j.issn.1003−1375.2020.01.008.
ZHANG Lei,LI Ruiqing,XIN Shimin, et al. Research and Implementation of A Power Controller for Unattended Stations[J]. North China Earthqauke Sciences,2020, 38(1):54-56. doi:10.3969/j.issn.1003−1375.2020.01.008.
Citation: ZHANG Lei,LI Ruiqing,XIN Shimin, et al. Research and Implementation of A Power Controller for Unattended Stations[J]. North China Earthqauke Sciences,2020, 38(1):54-56. doi:10.3969/j.issn.1003−1375.2020.01.008.

一种适用于无人值守台站电源控制器的研究与实现

Research and Implementation of A Power Controller for Unattended Stations

  • 摘要: 针对目前无人值守台站仪器因为软件等原因造成的通讯故障问题,研制了以Arduino Uno为硬件基础的电源控制器,其主要特点是,在无人值守台站需要监控的仪器和供电电瓶之间安装控制器,并将控制器接入网络;在远程同一网段的计算机安装管理端,并保持打开状态,可以不间断地实施监控功能,对仪器运行状态进行实时判断;并根据需要,实现多控制器的管理功能。经台站安装使用测试,表明设备运行效果良好。

     

    Abstract: A power controller based on Arduino Uno is developed to solve the communication failure problems caused by software and other reasons of unattended station instruments. Its main feature is to install the controller between the unattended station's instrument and the power supply battery, and connect the controller to the network. In the remote computer installation management terminal of the same network segment, and keep it open, the monitoring function can be implemented without interruption, and the operation state of the instrument can be judged in real time according to the needs of the implementation of multi-controller management functions. The actual test results show that the equipment is running well.

     

/

返回文章
返回